 
Packaged System
14 SEER - 2 Stage, Variable Speed
What does having a 14 SEER Package System
mean?
Your gas pack or heat pump’s efficiency is measured
by a Seasonal Energy Efficiency Rating (SEER). The higher
the SEER rating the more efficiently your unit operates.
Increased efficiency translates into savings in utility
costs.
|
Annual savings based on 36,000 BTU unit, 1500 cooling
load hours, and .08/kwh. Actual savings may
vary depending on climate conditions, energy
rates and patterns of usage.
|
Environmentally friendly R-410A refrigerant is non-ozone depleting |
|
|
|
|
What are the benefits of variable speed
cooling?
-
Variable speed technology under normal operating conditions
ensures constant comfort for the homeowner.
-
The motor
will automatically maintain its programmed level of airflow
even if there are dynamic changes in static pressure. This
constant airflow capability provides a number of important
benefits.
-
The ECM system can compensate for poor duct design.
-
Systems with inadequate duct volume can now deliver factory
calibrated airflow.
-
The ECM system can automatically compensate
for the increased static pressure as the system air filter
gets “dirty”.
-
Better indoor-air quality can
be achieved quietly and inexpensively with the ECM motor
because it can be set to run continuously at reduced airflow
levels, between heating or cooling cycles.
This allows for better air filtration without excessive drafts, and without
sacrificing efficiency. In fact, if you run your thermostat
in continuous fan mode, your electricity consumption will
be reduced from 500 watts to 65 watts over a package system
that has a standard blower.
|
